SL series UPS applies CPU integrated control technology with modified sine wave output. Its input voltage range is wide and its transfer speed is fast. From 600VA up to 2000VA
Application
Applicable to household PC, office equipment in enterprise and institution; small communication switchboard and server; LAN device, commercial POS machine; small workstation and its peripheral equipment; banking terminal and ATM system.
Performance Characteristics
The UPS can offer normal and stable service voltage under its input voltage range. When the input voltage is out of its range the machine will switch to battery mode automatically to keep the output power in order to protect the equipment, such as computers, ensure they will not be damaged by the over high or over low voltage, users can continue the operation of equipment for a while or save the data on computers while the power network is abnormal.
2- Wide range of AVR(Automatic voltage regulationSL input voltage range and under 3 steps of intelligent AVR function, it can provide a stable output voltage.
3- Automatic self-detection when UPS on(LED)Before the UPS on, red, yellow, blue LED will light up two times by cycle turns, after self-detection UPS switch to AC mode/battery mode or working mode.
4- Silence functionIn the “battery mode”, shortly press the switch to turn off the buzzer. But the battery is about to run out or the load is too heavy, the buzzer sound cannot be muted.
5- Overload protectionIn the battery mode, output voltage turn down correspondingly when it is overload, after the capacity of load is lower than the rated power then output voltage will back to rated value, it ensures the UPS will not shut down by abrupt overload which caused by surging current during the computer is working and other equipment is added.
6- Short circuit protectionWhen the miss-operation caused the load short circuit or computer failure (such as power tube breakdown of switch) cause short circuit, the UPS will shut down automatically for protection.
7- The low current switchSL series adopts low current switch to extend the service life which is longer than conventional battery and high current switch in AC current path.
8- Automatic chargingThere are two charging mode, charging time is faster than ordinary charging mode, higher efficiency, and greatly prolonging the service life of the battery.
9- With a bypass outputIndependent bypass output socket for external printers or scanners of computer peripherals, with surge protection of the load.
Technical Specifications
Model |
SL600 |
SL1000 |
SL1500 |
SL2000 |
SL3000 |
Capacity |
600VA/360W |
1000VA/600W |
1500VA/900W |
2000VA/1200W |
3000VA/1800W |
AVR |
3 steps of AVR, CPU controlled |
||||
Input |
|||||
Input voltage |
220/230V/240Vac |
||||
Input voltage range |
145~290Vac |
175~275Vac |
|||
Frequency |
50/60Hz |
||||
Input frequency range |
50Hz±5Hz / 60Hz±5Hz (Batter. mode) |
||||
Output |
|||||
Output Voltage |
220/230V/240Vac |
||||
AC Voltage Regulation (Batt. Mode) |
±10% |
||||
Frequency Range (Batt. Mode) |
60 Hz or 50 Hz ±1 Hz |
||||
Transfer Time |
Typical 2-6 ms |
||||
Waveform (Batt. Mode) |
Simulated Sinewave |
||||
Battery |
|||||
Battery Qty. & Capacity |
1X12V/7Ah |
2X12V/7Ah |
2X12V/9Ah |
2X12V/9Ah |
4X12V/9Ah |
Charging Time |
4~6 hours recover to 90% capacity |
||||
Protection & Function |
|||||
PROTECTION |
Battery low voltage protection |
||||
Overload protection |
|||||
Short circuit protection |
|||||
FUNCTION |
Auto re-starts when AC recovers |
||||
Auto re-starts when AC recovers |
|||||
Automatic charging (offline charging) |
|||||
Physical |
|||||
Net Weight Kg |
3.9 |
7 |
9 |
11 |
20 |
Unit Dimension WXDXH mm |
284*95*140 |
345*146*162 |
345*122*192 |
412*145*210 |
|
Environment |
|||||
Operation Temperature ºC |
0 to 40 |
||||
Humidity |
0 to 90% No Condensation |
||||
Noise Level |
Noise Level |
||||
Management |
|||||
LCD or LED RJ45/11 & USB |
Optional |