RDC1000 Battery Charger/Rectifier

AC Input

Rated Voltage

230VAC 1Ph ±10 % Or 400V AC 3Ph ±10 %

Frequency

50, 60 Hz ±5 %

THD

≤ 30 % typ.

Protections

Under/Over voltage – Automatic Circuit Break

DC Output

Rated Voltage

24 / 48 / 110 / 220 VDC

Charging Voltages

VRLA

Vented LA

Ni-Cd

Floating:

2.23-2.27

2.20-2.30

1.40-1.50

V/c

(adj.)

Boost:

–

2.40-2.45

1.50-1.65

V/c

(adj.)

Equalise:

up to 2.35

up to 2.70

up to 1.70

V/c

(adj.)

Charge Characteristic

“IU” according to DIN 41773

Static Regulation

± 1 %

Voltage Ripple

<1 % RMS

Output Total current limit

20 ÷ 100 % In (adj.)

Battery charging current

10 ÷ 100 % In (adj.)

Protections

Under/Over voltage – Overload – Short circuit

Control & Signalisation

Microprocessor

High Performance 8-Bit Microcontroller with Advanced RISC Architecture

LCD Panel

Backlit graphic LCD for Meters, Alarm/Status messages, History events & Parameters Settings

Signalling LED

Operation (green), Mains OK (green), Common minor alarm (red), Common major alarm (red)

Acoustic Signal

Buzzer

Volt free signalling contacts

Mains failure, Charger minor alarm, Charger major alarm, Battery low; relays COM/NO/NC

Environmental conditions

Installation

Indoor

Ambient Temperature

-10°C to +50°C

Storage Temperature

-25°C to +70°C

Relative Humidity

≤ 95 % @ 40°C non condensing

Max Installation Altitude

≤ 2000 m a.s.l.

Audible Noise

< 65 dB (A) at 1 m

Mechanical Characteristics

Cabinet

Free standing, floor mounting, steel sheet (15-20/10 sheet thickness

Cooling method

Fan assisted (temperature-controlled

Access

Front door

Cable entry

From bottom

Degree of protection

IP21/Other on request

Painting / Colour

Epoxy-polyester thermosetting powder coating / RAL 7035

Dimensions & Weights

See the table below

Standards

Quality

ISO 9001 – 2008

CE Conformity

Yes

Safety

IEC EN 60950

EMC

IEC EN 61000-6-2, 61000-6-4

Semiconductor Convertors

IEC EN 60146-1-1, 60146-1-3, 60146-2